|
|
BLOW-OFF SYSTEMS
Oleg Systems Co. Ltd. is a world's leading
designer and manufacturer of high-penetration air-knives for a variety
of industrial process applications:
- Liquids Blow-Off Devices
- Fast Air Cooling
- Conveyor Belt Cleaning
- Process Air Curtains
- Conveyor Dryers
for a number of industries and applications:
- automotive parts production
- beverage bottles conveyor drying
- plastic industry
- glass manufacturing blow off and cooling
- pallets cleaning
- industrial air-curtains for fume
separation
Air knives are available in extruded aluminum,
welded steel, stainless steel, plastic construction; lengths from 12"
to 144";
air velocities up to 40,000 Ft/min; adjustable slot opening, flexible
support structures; precise focusing systems.
For special applications we offer air canons
and air nozzles to achieve turbulent high velocity air flow.
Phone: 1-888-763-1800
___________
|
|
|
As compared to
curved sheet blades, aerofoils can apply greater force to the air,
thereby increasing maximum pressure and can maintain better efficiency
over a wider range of volumetric flow. Also by increasing the thickness
& curvature of the inner sections, the blades can be made stiffer,
this limits flutter and allows the impellers to be run at higher speeds.
In recent years, fan
speed control using VFDs has become economical. In this application, a
standard energy efficient motor is usually adequate down to 75% of
normal motor speeds. For a fan speed down to 25%, a premium efficiency
motor is required. Inverter duty motors are not usually necessary since
at 25% of normal fan speed, air delivery is minimal. Variable Frequency
Drives are also programmable. They are used to provide soft starts and
to ramp motor speed up or down in response to signals from the control
system. Finally, in a generally “clean” environment without a critical
need to remove large quantities of contaminants, a simple solution to
building pressurization is a Return Air Unit with the return air damper
motor controlled by building a pressure sensor. When building pressure
increases, more inside air is returned through the unit, relieving the
pressure. When building pressure falls, more outside air is supplied to
the building in order to “pump up the pressure”. Precise control of
building pressure by a single piece of equipment can thus be achieved.
Google+
Google+ Google+
Google+ Google+
Google+ Google+
Google+ Google+
Google+ Google+
Google+ Google+
Google+ Google+
Google+ Google+
Google+ Google+
Google+ Google+
Google+ Google+
Google+ Google+
Google+Google+
01234567891011121314151617
123456789101112
01
0123456789101112131415
|